Richter pump

Richter magnetic drive pumps

Richter magnetic drive pumps are used to transport corrosive, hazardous or ultrapure media and are ideal for average and difficult operating conditions for media where stainless steel and special castings do not provide enough resistance to corrosion.

The Richter pump portfolio includes pump heads up to 150 m and operating temperatures from -60 to +200 ºC.

  • Flow rate up to 600 m3/h
  • Discharge pressure up to 16 bar

Description

Technology: Single-stage, plastic-lined, sealless and mechanical seal standard chemical pumps (centrifugal pumps)

The important innovations include magnetic coupling pumps with SAFEGLIDE® PLUS slide bushings optimized for dry running and for solids up to 30% as well as SAFERUN® pump monitoring, which continuously monitors the measuring and operating data of the MNK magnetic drive pumps. Richter pumps provide the perfect alternative for pumps made of expensive and exotic metals (Hastelloy, Monel, tantalum, etc.) for media that contain solids, crystallize or that are toxic, hot or supercritical in some other way.

Advantages:

  • Highest resistance to corrosion
  • Thick-walled PFA/PTFE lining
  • Standard and block design
  • Magnetic drive pumps with slide bushing systems made of pure SSiC with optional SAFEGLIDE® PLUS dry-run optimization
  • Magnetic coupling pumps with double canning system
  • Vacuum-proof anchored case lining
  • Available in various designs and sizes
  • High efficiency
  • Virtually maintenance-free
  • Very maintenance-friendly thanks to the use of fewer parts with the most straightforward design
  • Virtually free of any shaft deflection

Options

  • Standard or block design
  • ISO or ASME design
  • Lining materials include PFA, PTFE, UHMWPE and antistatic fluoropolymers
  • Some available as self-priming, non-chokable or peripheral pumps
  • Slide bushings optimized for dry running
  • Pump monitoring
  • Case drain (also usable as a cleaning or monitoring connection)
  • Heating jacket (e.g. for crystallizing or polymerizing media)
  • Oil bath lubrication
  • Versatile mechanical seal variants
  • Mechanical seals matched to lined pumps
  • Pumping of media with solid content (depending on shape, hardness and size of the solid particles)
  • Temperature monitoring

Product portfolio

RMI/RMA: Magnetic drive pumps for moderate and difficult operating conditions

These magnetic drive, plastic-lined centrifugal chemical pumps do not have any seals and pump corrosive, environmentally harmful and ultrapure media in applications involving chemicals, pharmaceuticals, petrochemicals, semiconductor production, wood pulp, the metal industry, food, processing technology and waste disposal/recycling. They feature optimized hydraulics, solids restriction and a temperature range up to 150 ºC.

MNK/MNKA: Magnetic drive pumps for the most difficult operating conditions

These heavy-duty pump types are plastic-lined magnetic drive centrifugal chemical pumps in standard and block design. They do not use any seals and prevent the formation of eddy currents. The delivery rate extends to up to 600 m³/h with a pump head of 145 m. They are available in an ISO or ASME design.

RSI/RSA: Mechanical seal pumps for moderate and difficult operating conditions

These pump types are mechanical seal centrifugal pumps with a single-layer PFA lining. The rugged design also ensures dimensional stability at high temperatures. Standard RSI/RSA pumps (ISO/ASME designs) are equipped with labyrinth-like throttle rings that prevent large solids contained in the medium from entering the sealing space behind the impeller, reducing the axial thrust as a result. The conical sealing space aids in flushing the sliding surfaces.

SCK: Heavy-duty mechanical seal chemical pumps

This pump type has been developed for exceptionally long operating periods, even when operating near its limits, e.g. with cavitation, small flow rates and large flow rates. Like all Richter pumps, the SCK meets the requirements of ISO 5199. The mechanical seal technology encompasses the entire range from single-acting seals to complex, internally or externally lubricated and remotely monitored double-acting sealing systems.

MNK-S/SCK-S: Self-priming centrifugal chemical pumps

Self-priming Richter pumps prime automatically if the suction line is empty. This eliminates the need for feed tanks. Stationary and mobile containers can safely be emptied from above. The pumps are also ideal for emptying septic tanks. The self-priming pumps are available as magnetic drive pumps (standard and block designs) and mechanical seal pumps.

MNK-X/SCK-X: Non-chokable standardized chemical pumps

Non-chokable pumps are preferred for applications that pump media containing solids or entrained gases without any disruptions. In addition, they feature relatively good compatibility with gases. These pumps can be used to transport media with a solids content of up to approximately 30% by volume (depending on granularity and characteristics), particles from approximately 10 to 20 mm (depending on the pump size), fibrous particles and gas content of up to 5% by volume—all while keeping the pump and the media free of damage. The non-chokable pumps are available as magnetic drive pumps (standard and block designs) and mechanical seal pumps.

MPB: Peripheral chemical pumps with solenoid actuator

The design of peripheral pumps is specifically tailored to pumping smaller amounts (down to 5 m³/h) to higher heads (up to 100 m FS). The fields of application range from -60 ºC to 150 ºC and from vacuum pressure (when idle) to 16 bar based on the respective operating conditions and pump design.

Industries

Petrochemicals

LEWA provides durable pumps and metering systems for various processes in the petrochemical industry. Ask our experts for more information!

Pharma, Life Science & Biotech

LEWA supplies pumps and systems for the pharmaceutical, life sciences, and biotech industries that comply with all hygienic requirements. We're happy to help you!

Food & Beverage

Use LEWA pumps and system solutions for your homogenization processes in the food and beverage industry. Ask our experts for more information!

Other Industries

As specialists in fluid handling, we of course also have experience in many other industries. Simply contact our consultants to find out more!

Applications

Richter pumps can be found in many applications:

  • The production, cleaning and concentration of a vast assortment of different media such as sulfuric acid, nitric acid, hydrochloric acid, hydrofluoric acid, bromine, hydrogen peroxide, phosphoric acid, dichloroethane (DCE), vinyl chloride monomer, monochloroacetic acid, formic acid, acetic acid
  • Chloralkali electrolysis
  • Transporting hazardous materials
  • Ultrapure rinsing (semiconductor industry)
  • Wastewater treatment (power plant technology)
  • Condenser cooling and flue gas cleaning
  • Cleaning of solvents and surfactants
  • Chemicals for extracting minerals (mining)
  • Chemical water treatment
  • Reverse osmosis process (desalinization)
  • Cleaning and rinsing in the food and beverage industry

Downloads

Get updates

Subscribe to our newsletter!

Get LEWA insights on products, applications and the business of metering fluids. Subscribe now for free.

Follow us

LEWA is on Linkedin LEWA is on YouTube
© 2019 LEWA GmbH
© 2019 LEWA GmbH