- Type CM-B option with closed coupling
- Top and bottom flushing connections
- Drainage through flushing connection or
- Drainage through volute casing drain
- Liquid Temperature Sensor
- Secondary sealing device
Munsch standardized CM & CM-B pump
Chemical handling pump
Chemical industries, with their variety of demanding processes, often require pumps with increased safety, reliability and flexibility. CM mag drive pumps have been developed putting these topics first. Today MUNSCH mag drive pumps are also being found in many industrial applications like environmental industries, chlorine production as well as electrolysis and electro plating plants where operators have a major focus on reliability and safety.
The CM pumps, CM Series standardized pump with dimensions to EN 22858/ISO 2858/ISO 5199 or CM-B close-coupled pump with casing dimensions to EN 22858/ISO 2858; complemented by size 40-25-125 and 40-25-160 pumps.
Good reasons for a Munsch Pump Series NPC and NPC-B.
The fluid dynamics of Munsch pumps are calculated, visualized and optimized using the latest numerical techniques (Computational Fluid Dynamics). The result is a hydraulic design with a virtually ideal flow profile.
The numerically optimized hydraulic design is a key factor in minimizing the lifecycle costs of MUNSCH pumps. Capital and maintenance costs are reduced through the selection of the best suited hydraulic design and optimum motor sizes. Smaller cable cross-sections and lower-rated motor breakers keep down installation costs. The high pump efficiencies directly translate into energy savings.
Munsch has the right impeller design for your specific pumping application. Wear, suction behaviour and efficiency are key factors determining the choice of the impeller. The right combination of impeller (hydraulics), material and shaft seal is all-decisive for a successful pump design and long service lives. Munsch pumps are available with closed, semi-open and vortex impellers.
A solids deflector in the pump casing redirects solids away from the mechanical seal and back to the flow path of the process fluid.
The impeller is positively locked to the pump shaft for reverse rotation protection (e.g. during the sense of rotation check).
Munsch chemical pumps feature a steep performance characteristic. This means that the pumps can be adjusted exactly to the operating point.
|Pump capacity [Q]||Differential head [H]||Service temperature [t]||Operating pressure [p]||Discharge nozzle||Motor rating|
|up to 240 m³/h||up to 90 m||-20 °C to 180 °C||up to 16 bar||DN 25 to DN 65||CM: up to 30 kW |
Crude oil must be cleaned, separated, and converted (refined) until the final products suitable for sale are made (e.g., gas, diesel, heating oil, lubricants, propane, butane). LEWA supports you with pumps and metering systems, which are used in the refining process during chemical metering. Application with our products are distillation plants, coker, cracker, or visbreaker, for example. Ask our experts for more information!More Details
We have supplied durable pumps and metering systems for applications such as the hydrocracking process for over 50 years. Petrochemicals generate starting products for the manufacture of plastics, pharmaceuticals, colorants, detergents, and other products. Contact our experts and allow us to provide you with detailed information about metering and pumping solutions for the hydrocracking process!More Details
When critical, environmentally hazardous, toxic, or flammable fluids and suspensions need to be reliably conveyed or metered in high-pressure processes, there is no alternative to hermetically sealed metering pumps, process diaphragm pumps, and metering systems from LEWA. Hermetically sealed LEWA pumps with pressures up to 1200 bar are the first choice for the production of chemical intermediate and end products. Contact our experts and let us advise you about your individual chemical pump or system solution!More Details
We offer you special expertise for all compounding processes in the plastics processing industry (addition of waxes, flame retardants, and lubricants). Contact our experts! We're happy to give you advice about metering and pumping solutions for the plastics industry such as in polyethylene processing.More Details
Processes with strict quality and hygiene requirements, such as GMP or the need to avoid preservatives, require the right equipment. We support you in the selection and the design of hygienic components and systems for producing personal care products. Contact our experts and let us advise you – we will work with you to develop customized metering solutions for your process, such as for manufacturing personal care products.More Details
LEWA offers customized solutions and references for almost all industries in which processes require exact metering or the reliable conveyance of fluids. As specialists in fluid handling, we of course also have experience in areas outside of our key markets.More Details